English Customer Service: 1-844-FIRMAN1Page 12
1. Before starting the generator, check for
loose or missing parts and for any damage
which may have occurred during shipment.
2. Check oil level and fuel.
3. Disconnect all electrical loads from the
generator. Never start or stop the generator
with electrical devices plugged in or turned on.
4. Turn the fuel valve to the “ON”
(l)position.
5. Flip the
engine switch to the
"RUN"(l) position.
6. Flip the
battery switch to the
"ON"(l) position.
7. Move the
choke lever to the
“START” position.
8. Press and
hold the engine switch in the "START"(ll) position
for few seconds and release the switch to the
"RUN"(l) position.
9. Do not over-choke. As soon as engine
starts and warms up, move the choke lever to the
“RUN” position.
To Next Page
Loading...
