– 12 –
Functions of the Keypad (cont’d)
ALPHA DISPLAY WINDOW: A 2-line, 32-character Liquid Crystal Display (LCD).
Displays protection point identification and system status, messages, and user instructions.
1 OFF
: Disarms the burglary portion of the system, silences alarms and audible trouble
indicators, and clears visual alarm trouble after the problem has been corrected.
2 AWAY
: Completely arms both perimeter and interior burglary protection by sensing an
intruder's movements through protected interior areas as well as guarding protected doors,
windows, etc. Late arrivals can enter through an entry delay zone without causing an alarm
if the system is disarmed before the entry delay time expires.
3 STAY
: Arms the perimeter burglary protection, guarding protected doors, windows and
other perimeter protection points, and sounds an alarm if one is opened. Automatic bypasses
certain areas that allows movement within your house without causing an alarm. Late
arrivals can enter through an entry delay zone without causing an alarm if the system is
disarmed before the entry delay time expires. See ARMING PERIMETER ONLY for a full
explanation of the STAY key.
4 MAXIMUM
: Arms in manner similar to AWAY mode, but eliminates the entry delay
period, thus providing maximum protection. An alarm will occur immediately upon opening
any protection point, including entry delay zones.
5 TEST
: Tests the system and alarm sounder if disarmed.
6 BYPASS
: Removes individual protection zones from being monitored by the system.
Displays previously bypassed protection zones.
7 INSTANT
: Arms in manner similar to STAY mode, but turns off the entry delay
period, offering greater security while inside and not expecting any late arrivals. An alarm
will occur immediately upon opening any perimeter protection point, including entry delay
zones.
8 CODE
: Allows the entry of additional user codes that can be given to other users of the
system.
To Next Page
Loading...
Need help?
General
