To Next Page

To Previous Page

– 20 –

Security Codes and Authority Levels (cont’d)

PART. 1 A0* WHSE

USER 003 AUTH=3G.

When all partitions have been displayed, the

keypad scrolls through the partition(s) that access

has been assigned, and displays the user number,

authority level and global arm option for each. The

“G” after the authority level indicates that the

global arm feature is active for this user in the

displayed partition. The "*" indicates the partition

from which this user can be changed or deleted. The

"." at the end of the second line indicates that this

user sends open/close reports. Open/close reporting

is automatically active for any users added by you,

if you have open/close reporting active.

To Change a User's Code

CODE

1. Enter Master or Manager code and press the 8 key + user number

to be changed.

2. Enter the new code for that user.

ADD NEW USER?

0 = NO , 1 = YES

The system will recognize that the user number is

already in use and will prompt whether or not this

is a new user. Enter 0 to change the existing

user's code to the code entered in step 3.

USER 002 CHANGED

SUCCESSFULLY

The system confirms that the change is allowed

based on authorization level, and if so, puts the

new code into effect.

Note that if changing one’s own code, the

system prompts for the new code to be re-entered.

This prevents accidentally changing one's own

code.

First Alert FA1660C User Manual

Other manuals for First Alert FA1660C