21
A
POSITIONING INTO CABINETRY
IMPORTANT!
●
Ensure the hose is not run over by the appliance when pushing into the cabinetry to prevent damage and possible waterleaks.
Position the appliance into the cabinetry
1
Coil the excess water hose and power cord flat behind the appliance (A).
2
Push the appliance into the cabinetry until the anti-tip bracket overlaps the
rear top edge of the appliance (B).
IMPORTANT!
●
Ensure the appliance is centered.
●
Ensure the anti-tip bracket overlaps the refrigerator by a minimum 2 3/8"
(60mm) forasecure hold (C).
2 3/8" (60mm) min.
overlap
Anti-tip
bracket
Refer to 'Attach anti-tip bracket' for more information.
C
To Next Page
Loading...
