Fisher & Paykel ActiveSmart RS90A - Water Dispenser Operation and Lock

20
Complete and keep for safe reference:
Model
Serial No.
Purchase Date
Purchaser
Dealer Address
Installer’s Name
Installer’s Signature
Installation Company
Installation Date
TO BE COMPLETED BY THE INSTALLER
All models
Check all parts are installed.
Ensure the product is level, securely fastened to the cabinetry with the anti-tip
bracket provided.
Ensure the doors/drawer can open and close freely with no resistance from
the cabinetry.
Ensure all internal and external packaging is removed from the product.
@1 FINAL CHECKLIST
Ice & Water models only
Ensure change filter icon is enabled. This will remind you when the filter next needs
replacing. Press and hold , and for 4seconds on the internal control panel.
Ensure the water filtration system has been flushed.
To flush the water filtration system
When using your water dispenser for the first time, run the dispenser pad until water
dispenses, this will displace trapped air in the water tank and filter system. Rest the
dispenser pad for 2minutes.
Dispense and discard 4litres of water, then rest the dispenser pad for a further
2minutes, repeat process.
Failure to do this will result in excessive dripping from your water dispenser.
ImpORTANT!
DO NOT continuously dispense water for longer than 2minutes at a time.
Ensure a manual ice maker cycle has been forced. Press and hold , and for
4seconds on the internal control panel, then close the refrigerator compartment door.
The ice tray will flip twice. Empty the water from the bin, then dry and replace.
Ensure ice maker is turned on. Press button once on the internal control panel. This
light above the button will illuminate indicating ice maker is on. Please discard the first
3harvests of ice (8 cubes per harvest).