Fisher & Paykel DishDrawer DD24D Series - Option Adjustment Quick Reference Charts

599735A
23
4.6.1 Option Adjustment Quick Reference Charts
Rinse Aid Setting (rA):
(Alters the amount of rinse aid dispensed.)
Press and hold ECO, then press KEYLOCK for 5 seconds.
rA will be displayed (integrated: Red LED above start/pause button showing).
Press KEYLOCK.
The rinse aid setting will advance on the secondary control panel LEDs with each press.
Press POWER to exit and save selected setting.
Water Softener Supply Hardness Setup (Hd) (where a water softener is
fitted):
(Alters the water softener setting depending on water supply hardness.)
Press and hold ECO, then press KEYLOCK for 5 seconds.
rA will be displayed.
Press START/PAUSE once.
Hd will be displayed (integrated: Green LED above start/pause button showing).
Press KEYLOCK.
The water softener setting will advance on the secondary control panel LED’s with each press.
Press POWER to exit and save selected settings.
Auto Power Option (AP):
(Powers up automatically when the drawer is opened.)
Press and hold ECO, then press KEYLOCK for 5 seconds.
rA will be displayed.
Press START/PAUSE twice.
AP will be displayed (integrated: Orange LED above start/pause button showing).
Press KEYLOCK.
Turns auto power on and off. Scrubbing brush or secondary control panel LEDs showing = AP
on. Scrubbing brush or secondary control panel LEDs not showing = AP off.
Press POWER to exit and save selected setting.
End of Cycle Beeps (EC):
(Six beeps at the end of every cycle.)
Press and hold ECO, then press KEYLOCK for 5 seconds.
rA will be displayed.
Press START/PAUSE three times.
EC will be displayed (integrated: Green LED above start/pause button, and ECO light is red).
Press KEYLOCK.
Turns end of cycle beeps on and off. Scrubbing brush or secondary control panel LEDs
showing = EC on. Scrubbing brush or secondary control panel LEDs not showing = EC off.
Press POWER to exit and save selected setting.