Need help?Do you have a question about the Fisher & Paykel GC600WF and is the answer not in the manual?
General| Category | Cooktop |
|---|---|
| Type | Gas Cooktop |
| Fuel Type | Gas |
| Number of Burners | 4 |
| Width | 600 mm |
| Material | Stainless Steel |
| Safety Features | Flame Failure Protection |
| Ignition Type | Electronic |
| Weight | 12 kg |
| Warranty | 2 Years |
| Dimensions (W x D x H) | 600mm x 530mm |
| Gas Type | LPG/NG |
| Burner Types | Semi-rapid, Rapid, Wok |
| Control Type | Knob |
Provides physical measurements for different cooktop series.
Details the meaning of model codes and suffixes used.
Specifies required dimensions for countertop installation.
Lists burner types, gas ratings, and orifice sizes for various models.
Identifies the number and types of gas and flame failure valves used.
Details the electrical specifications for ignition systems.
Specifies total gas consumption in MJ/h, kW, and BTU for each series.
Emphasizes that installation and servicing must be done by qualified persons.
Illustrates the ignition circuit for standard GC600, GC900, and GC9002 series.
Details the ignition circuit specifically for GC36 models in USA/Canada.
Guides adjustment of the minimum flame setting on burners.
Provides instructions for changing gas orifices and pressure settings.
Step-by-step instructions for safely removing the cooktop's hob.
Procedure for safely disconnecting and removing the entire cooktop unit.
Instructions for replacing a faulty ignition electrode.
Procedure for replacing the main electronic ignition control box.
Guidance on replacing the microswitch wiring harness for specific models.
Steps to verify the correct operation of the flame failure safety system.
Instructions for replacing the thermocouple component.
Detailed steps for removing and replacing a gas control valve.
Procedure for cleaning and re-greasing gas valve components.
Troubleshooting steps when burners fail to produce a spark.
Diagnosing issues when a spark is present but gas does not ignite.
Troubleshooting why the flame extinguishes after the control knob is released.
Diagnosing no spark issues on models with auto reignition.
Troubleshooting ignition failure with spark present on auto reignition models.
Resolving issues where the ignition system sparks constantly.
Troubleshooting flame extinction at the lowest burner setting.
Diagnosing flame appearance issues like distortion or incorrect color.
To Next Page