479646
55
13.2.4 Abnormal Noise and Vibration
Leaking Water
Replace
damaged half of
outer tub.
Have the transit bolts been
removed?
Remove the bolts and
check the installation.
Is there foreign material in the
washer?
Are the mounting bolts for the
counter weights and the stator
tight?
Adjust the adjustable feet
and tighten the locking nut.
Is the washer stable and level
front to back and side to side?
Disconnect the motor harness at the
motor controller and rotate the drum
by hand. Is there an abnormal
noise?
Dismantle the tub, remove
the drum and check the
bearings. If faulty, replace
the tub rear.