Instruction Manual
D100714X012
461 Valve
June 2017
14
Parts Ordering
Each body-bonnet assembly is assigned a serial number, which is on the body nameplate. The serial number also
appears on the actuator nameplate if you bought a valve and actuator assembly. Refer to this serial number when
contacting your Emerson sales office
or Local Business Partner for technical advice. When ordering replacement parts,
mention this serial number. Also specify key number and part description following Parts List.
WARNING
Use only genuine Fisher replacement parts. Components that are not supplied by Emerson Automation Solutions should
not, under any circumstances, be used in any Fisher valve, because they may void your warranty, might adversely affect the
performance of the valve, and could cause personal injury and property damage.
Parts List
Note
Contact your Emerson sales office or Local Business Partner for Part
Ordering information.
Key Description
1 Valve Body
If you need a valve body as a replacement part, order by valve
size, serial number, and desired material.
2* Seat Ring
3* Valve Plug
4* Seat Ring Retainer
5* Liner
6* Gasket, N04400
7 Stud Bolt, (8 req'd for NPS 2x3 through NPS 4x6,
12 req'd for NPS 6x8)
8 Hex Nut, (12 req'd for NPS 6x8, 8 req'd for all other sizes)
Key Description
9 Line Position Pin
10 Valve Stem
11* Pin, S31600 SST
12 Pipe Plug, Lubricator, or Lubricator/Isolating Valve
14 Bonnet
If you need a bonnet as a replacement part, order by valve size
and stem diameter, serial number, and desired material.
16* Upper Wiper, felt
17 Spring
18 Washer
19* Packing Ring, PTFE
21* Male Adaptor
22* Female Adaptor
23 Packing Flange
24 Packing Stud (2 req'd)
25 Packing Nut (2 req'd)
26 Yoke Locknut
29 Packing Follower
33 Companion Flange
34* Gasket, N04400, (2 req'd)
35 Stud Bolt (4 req'd)
36 Hex Nut (4 req'd)
37 Equalizing Connection
40 Nameplate
41 Wire
42 Drive Screw
*Recommended spare parts
To Next Page
Loading...
