To Next PageTo Next Page
Need help?Do you have a question about the Fisher EZR and is the answer not in the manual?
General| End Connection Style | NPT |
|---|---|
| Maximum Inlet Pressure | 400 psig |
| Temperature Capabilities | -20°F to 180°F (-29°C to 82°C) |
| Certifications | PED |
| Type | Regulator |
| Output Signal | Pneumatic |
| Supply Pressure | Not applicable (self-operated) |
| Ambient Temperature Range | -20°F to 180°F (-29°C to 82°C) |
| Mounting | In-Line |
| Outlet Pressure Ranges | 3 to 30 psig |
Defines the manual's coverage of installation, startup, adjustment, and maintenance.
Describes the Type EZR regulator and its applications.
Details main valve body sizes, end connections, and structural ratings.
Lists maximum inlet pressures and pressure drops for main valves and pilots.
Specifies the available outlet pressure ranges for the regulator pilots.
Provides the travel distance for the main valve plug across different sizes.
Outlines minimum and maximum differential pressures required for operation.
Details the proportional band characteristics for the regulator pilots.
Lists the temperature ranges the regulator can operate within.
Indicates whether pressure registration is internal or external.
Lists available optional features for the Type EZR regulator.
Summarizes the characteristics of different pilot types like 161AY, 161EB, and PRX.
Details the low-pressure pilot with specific pressure ranges and bleed characteristics.
Describes the monitor version of the Type 161AY pilot for isolated bleed applications.
Details the high-accuracy pilot with specific pressure ranges and bleed characteristics.
Describes the monitor version of the Type 161EB pilot for isolated bleed applications.
Details the PRX/120 pilot with its pressure range and features.
Provides general guidelines and considerations for installing the Type EZR regulator.
Details installation procedures for wide-open monitor configurations.
Outlines installation steps for working monitor configurations.
Describes the installation of PRX pilots in working monitor systems.
Instructions for adjusting the pilot pressure setting for various pilot types.
Guidance on adjusting the Type 112 restrictor for proportional band and speed.
Procedures for safely shutting down single-regulator and monitor systems.
Information on replacing main valve trim parts for the Type EZR.
Steps to convert an existing E-body valve to a Type EZR configuration.
Detailed procedures for disassembling and assembling the Type EZR main valve.
Maintenance steps for the diaphragm and plug assembly components.
Procedures for maintaining the travel indicator assembly.
Details specific parts, adjustments, and configurations for 161EB series pilots.
Details specific parts, adjustments, and configurations for 161AY series pilots.
Maintenance procedures for PRX series pilots, including case adjustments.
Illustrates various mounting configurations and parts for pilots with the Type EZR.
Comprehensive list of part numbers for the Type EZR main valve and pilots.
