Fisher i2P-100 User Manual

Instruction Manual
D103198X012
i2P-100 Transducer
July 2014
13
MOUNTING BRACKET
i2P‐100 TRANSDUCER
REGULATOR
PIPE
NIPPLE
2.5 INCH
CHAMFER 45_ to 27/64 DIA
1/4‐18 NPT EXTERNAL
Figure 6. Typical Fisher i2P‐100 Mounting With 67CFR Filter Regulator
Diagnostic Connections
To support diagnostic testing of valve/actuator/positioner packages, special connectors and hardware are available.
Typical connector installations are shown in figure 7. The hardware used includes a 1/4 NPT pipe nipple and pipe tee
with a 1/8 NPT pipe bushing for the connector. The connector consists of a 1/8 NPT body and body protector.
Figure 7. Diagnostics Hookup for Fisher i2P‐100 Transducer
PIPE BUSHING
BODY PROTECTOR
BODY
PIPE TEE
PIPE NIPPLE (SEE FIGURE 6)
STEM
PROVIDED WHEN
GAUGE IS SPECIFIED
GAUGE
GE06439‐A
(sheet 1 of 4)
B2395‐1

Fisher i2P-100 Specifications

General

Brand	Fisher
Model	i2P-100
Category	Transducer
Language	English