Lit. No. 95902/95903, Rev. 01 12 June 15, 2008
Baffl e Adjustment
Spread pattern and the amount of material dispensed
depends on engine RPM, gate position, and baffl e
settings.
• Decreasing RPM and/or gate-opening will
decrease the amount of material coming to the
spinner.
• Increasing RPM and/or gate-opening will increase
the amount of material coming to the spinner.
OPERATING THE SPREADER
Internal Baffle
Adjustment Handle
(both sides)
Center Belt Drive Chute
To Next Page
Loading...
