Fisher POLY-CASTER User Manual

POLY-CASTER™ LT Hopper Spreader
Installation Instructions
These Installation Instructions are for FISHER
®
POLY-CASTER LT hopper spreaders with
serial numbers 0000 and higher.
CAUTION
Read this manual before installing or
operating the spreader.
A DIVISION OF FISHER, LLC
Fisher Engineering
August 15, 2013
Lit. No. 43583, Rev. 01
78902
50 Gordon Drive, Rockland, Maine 04841-2139 • www.fi sherplows.com

Fisher POLY-CASTER Specifications

General

Hopper Material	Polyethylene
Motor	12V DC
Auger Type	Steel
Controller	Variable speed control
Power Source	12V DC
Material Type	Salt, Sand
Control Type	Variable Speed
Spreading Width	5 - 30 ft

Summary

Poly-Caster LT Hopper Spreader Installation Instructions

Safety Information

Safety Definitions

Explanation of safety terms like WARNING and CAUTION used in the manual.

Warning and Caution Labels

Familiarization with various warning and caution labels found on the spreader.

Safety Precautions

Personal Safety

Cell Phones Safety

Ventilation Safety

Battery Safety

Loading

Vehicle Certification

Requirements for altered vehicle certification labeling for new installations.

Material Weights

Guidelines for reading and adhering to manufacturer's material package labeling.

Determining Vehicle Payload

Mounting The Spreader

Wiring and Harness Instructions

Vehicle Control Harness Installation

Steps and considerations for installing the spreader control harness in the vehicle.

Harness Dust Cover

Instructions for installing the dust cover on the harness.

Harness Wiring Diagram

Vehicle Harness Diagram

Spreader Harness Diagram

Electrical Routing

Final Adjustments