Fisher POLY-CASTER User Manual

Lit. No. 43573/43583/43593, Rev. 01 4 August 15, 2013
SERIAL NUMBER LABEL
Code Defi nition
MM 2-Digit Month
YY 2-Digit Year
LL 2-Digit Location Code
#### 4-Digit Sequential Number
PPPPP 5-Digit Assembly PN
• DO NOT REMOVE SPREADER WITH MATERIAL IN HOPPER
• FASTEN SPREADER DOWN WITH APPROVED RATCHET
STRAPS AND BOLT KIT
• REAR FRAME LOCATOR BARS MUST BE IN PLACE BEFORE
OPERATING VEHICLE
DANGER
D6547
ROTATING AUGER CAN CAUSE
SERIOUS INJURY OR DEATH
• Keep arms, hands, and loose clothing
away from auger.
• Shut o control and unplug spreader
before servicing.
D6335
SERIAL NO.
0.5 cu yd
MODEL NO.
MMYYLL####PPPPP
SAFETY INFORMATION

Fisher POLY-CASTER Specifications

General

Hopper Material	Polyethylene
Motor	12V DC
Auger Type	Steel
Controller	Variable speed control
Power Source	12V DC
Material Type	Salt, Sand
Control Type	Variable Speed
Spreading Width	5 - 30 ft