FLAMMA FX200 - Using the Built-in Tuner; Tuner Operation and Controls

www.flammainnovation.comShenzhenFlammaInnovationCo.,Ltd
19
Tuner
PressandholdtheandFootswitchAsimultaneouslytoentertheTUNERpage.
Playanoteandthescreenwilldisplaythecurrentnotenameandpitch.Thecursorstaysatthe
middledenotingthetargetforintune.
ClickontheMUTEatthebottomlefttoswitchbetweenMUTEandBYPASS.ItissettoMUTEby
default.
Clickonthearrowiconattherightbottomcornertoadjustthefrequency.Itissetto
440Hzasdefault.Itcanbeadjustedfrom435HzTO445Hz.
Youcanclickontheonthetoprightcornerandpressanyfootswitchtoquitthetuner.