FLAMMA FX200 - Synchronizing Looper and Drum Machine; Syncing Techniques and Limitations

www.flammainnovation.comShenzhenFlammaInnovationCo.,Ltd
24
LOOPER&DRUM
TheFX200supportsturningonDRUMandLOOPERsimultaneouslyforpracticeorrecording.Pleasefollowthe
instructionsbelowtolettherecordedtracksyncwithdrummachine.
Turnondrummachineandselectarhythmtype;
Inthelooperpage,startrecordingthenthedrummachinewillrestartandsyncwithlooper.
WhenyoudothePLAYorDUBaroundtheendofabar,thelooperwillsyncwithdrummachine
forplay.
IfyoudothePLAYorDUBwhenitislessthan½ofcurrentbar,thedrummachineandlooper
willrestartfromthebeginning.Thelastbaroftherecordedtrackwillbedeleted.
IfyoudothePLAYorDUBwhenitismorethan½ofcurrentbar,therecordingwilllastuntil
currentbarfinishesthenitwillstarttoPLAYorDUB.
IfyoustopthelooperthenPLAY,thedrummachinewillsyncwiththelooperandstartfromthe
beginning.
Forexample:TheRhythmissetas4/4.Turnonthedrummachine-ifyoustarttoRECthrough
thefirstbeatofthethirdbarthenhitPLAYorDUB,thelooperanddrummachinewillrestart
fromthebeginning,andthefirstbeatofthethirdbarwillbedeleted.Therefore,onlytwobars
arerecorded.
IfyouhitPLAYorDUBatthethirdbeatofthethirdbar,thelooperwillkeeprecordinguntilthethirdbar
finishes,thenPLAYorDUB.Therefore,thesethreebarswillberecordedcompletely.
Thesyncfunctiondoesnotsupportthesituationbelow:
Beforeturningonthedrummachine,thelooperisalreadyrecording.
Whenthedrummachinesyncswithlooper,thespeedofthedrummachineischanged.
Whenthedrummachinesyncswiththelooper,thestyleofthedrummachine,ortherhythmtypeischanged.