Need help?Do you have a question about the FLAMMA FX200 and is the answer not in the manual?
General| Type | Multi-Effects Processor |
|---|---|
| Effects Types | Delay, Reverb, Compression, EQ |
| Inputs | 1 x 1/4" Instrument input |
| Outputs | 2 x 1/4" (L/R), 1 x 1/8" Headphone |
| MIDI | In, Out |
| USB | 1 x Type-B |
| Software | Editor Software |
| Power | DC 9V power supply |
| Weight | 2.2 lbs |
Guidelines for safe power connection and device handling.
Crucial warnings for safe operation and environment.
Details on LCD, footswitches, effects modules, presets, and connectivity.
Controls for overall volume and the primary display interface.
Explanation of navigation, expression pedal indicator, and bank/preset switching.
Details on setting up and using the expression pedal for various controls.
Descriptions of AUX IN, EXP2, INPUT, SEND, RETURN, OUTPUT, PHONES, and XLR OUT.
Details on MIDI IN/OUT, USB, DC IN, and Power Switch functions.
Connecting the FX200 with a power amplifier and cabinet using FX LOOP.
Connecting to full-range, flat-response devices like PA systems or monitors.
Connecting to both FRFR devices and amplifiers simultaneously.
Using the FX200 as a pre-pedal connected directly to an amplifier's input.
Placing the FX200 as a post-pedal within an amplifier's FX LOOP.
Implementing the four-cable method for pre-pedal and post-pedal effects.
Initial startup sequence and the main home screen interface.
Navigating the editing page and understanding the effects chain display.
Methods for selecting, switching, and accessing preset patches.
Modifying effect parameters and saving custom presets.
How to access and use the chromatic tuner for instrument tuning.
Detailed steps for recording, overdubbing, and playing back loops.
Notes on loop recording capacity, data clearing, and PRE/POST modes.
Choosing drum grooves, rhythm types, and tempo settings.
Adjusting drum machine volume and BPM using TAP TEMPO.
How to sync recorded loops with drum machine rhythms and sync limitations.
Configuring SEND/RETURN levels and MIX in Serial/Parallel modes.
Setting footswitch to OFF, CTRL, or TAP modes.
Configuring footswitches for delay time (TAP) or module control (CTRL).
Assigning expression pedal to control parameters for PEDAL 1 and PEDAL 2.
Setting the internal pedal as a volume or wah pedal.
Calibrating the internal and external expression pedals for accurate response.
Setting the screen brightness level for optimal visibility.
Controlling the overall input signal level for the device.
Adjusting tone with multi-band EQ, including frequency and gain controls.
Managing cabinet simulation synchronization and per-channel settings.
Choosing between NORMAL and FAVORITE footswitch modes.
Enabling natural fade-out for delay and reverb effects.
Setting the looper's position in the effects chain (PRE or POST).
Setting up MIDI IN/OUT for external control and communication.
Reference for MIDI Program Change and Control Change codes.
Setting the MIDI channel for communication with external devices.
Enabling or disabling MIDI clock sync with external gear.
Using the FX200 as a 24-bit audio interface for recording.
Adjusting recording and playback volume levels for USB audio.
Choosing between English and Chinese for the display language.
Steps to reset the FX200 to factory default settings.
Quickly configuring Input Level, Cab Sync, Global Cab, and FS Mode.
Using software for tone editing, preset management, and firmware updates.
Details on compressor and wah effects.
List of overdrive and distortion effects and their descriptions.
List of amplifier models and their base inspirations.
List of cabinet simulations and their characteristics.
Details on noise gate effects and equalization types.
List of modulation effects like chorus, flanger, and phaser.
Descriptions of various delay effects, including analog, digital, and echo.
Overview of reverb types like spring, room, hall, and plate.
Step-by-step guide to download and install the latest firmware.
Details on effect modules, presets, file formats, and sample rates.
Technical specifications for all input/output ports and converters.
Information on dimensions, weight, and included accessories.
To Next Page