FLAMMA FX200 - Amplifier FX LOOP Setup

To Next Page

To Previous Page

www.ﬂammainnovation.comShenzhenFlammaInnovationCo.,Ltd

RecommendSetup

Inthissetup,theFX200isusedasthepostpedalintheFXLOOPofanampliﬁer.Theeﬀectsofyour

FX200willbeplacedbetweenthepreampandthepowerampoftheampliﬁer.Itisrecommended

toturnoﬀtheAMPandCABmodule.

1.ConnecttotheINPUTofampliﬁer

2.TheSENDoftheampliﬁerconnectstotheINPUTofFX200

3.TheRETURNoftheampliﬁerconnectstotheOUTPUTofFX200

FXLOOPofAmpliﬁer