FLAMMA FX200 - Four-Cable Method Setup

www.flammainnovation.comShenzhenFlammaInnovationCo.,Ltd
11
RecommendSetup
YoucanusetheFX200withanamplifierviathefour-cablemethod,astheFX200hasanintegrated
FXLOOP.TheFX200effectswillplaytheroleofpre-pedalandpost-pedal.
Pleasefollowtheinstructionsbelowtosetup:
1.TurnontheFXLOOPintheFX200andsetittoSERIALmode.
2.TurnofftheAMPandCABmodule,topreventunexpectedresults.
3.SelectmodulesandchangetheorderofthemtoplacebeforeorafterFXLOOP.
01
1.Connecttoguitar
2.TheSENDoftheFX200connectstotheINPUTofamplifier
3.TheRETURNoftheFX200connectstotheSENDofamplifier
4.TheOUTPUToftheFX200connectstotheRETURNofamplifier
02
Four-CableMethod
0403