FLAMMA FX200 - Direct Amplifier Input Setup

To Next Page

To Previous Page

www.ﬂammainnovation.comShenzhenFlammaInnovationCo.,Ltd

RecommendSetup

ConnectFX200totheinputofanampliﬁerdirectlyanduseitasapre-pedalbeforetheampliﬁer.

ItisrecommendedtousethissetupiftheampliﬁerdoesnothaveanFXLOOP.TurnoﬀtheAMP

andCABmodule,astheampliﬁersignalwillgothroughthepreampandcabinetofyourampliﬁer.

1.Connecttoguitar

2.ConnecttotheINPUTofampliﬁer

Inputofampliﬁer