FLAMMA FX200 - Volume Pedal and WAH Configuration

www.flammainnovation.comShenzhenFlammaInnovationCo.,Ltd
29
WAH：
SelectFXineditingpage,thenchoosethe95CRYor535CRYmodule.
SelectEXPRESSIONthensettoFXandselectPOSITION.
Inthismode,youcanpresstheexpressionpedalheavilytoturniton/off.
Note:Oncetheexpressionpedalfunctionhasbeensetup,asaveneedstobeexecuted.
VOLUME：Settheinternalpedalasthevolumepedal.Youcanutilizethisfunctiontocontrolthe
masteroutputvolumelevelviatheinternalpedal
PEDAL
SelectPEDAL,andthenselectVOL.TheLEDindicatorofEXPwillbeoff.Youcansetuptheminimum
valueandthemaximumvalue.0foronoutputsignal,100formaximumvolumelevel.
Notes:WhentheEXPLEDindicatorisOn,thepedalworksasanexpressionpedal.Whenthe
EXPLEDindicatorisOff,thepedalworksasthevolumelevelpedal.