FLAMMA FX200 - Pedal Calibration Procedure

www.flammainnovation.comShenzhenFlammaInnovationCo.,Ltd
30
PEDAL
CALIBRATE：Pleasecalibratethepedalbeforeusingforthefirsttime.Whenthepedaldoesnot
workproperly,totrytocalibrateitagainforuse.
SelectCALIBRATE.SelectfromPEDAL1(internalpedal)andPEDAL2(externalpedal)forcalibrating.
MIN：Setuptheminimumposition.ClicktoselectMIN,thenmovethepedaltoheeldownposition.
MAX：Setupthemaximumposition.ClicktoselectMAX,thenmovethepedaltotoedownposition.
PRESS：Setupthepressureofturnthepedalon/off.ClicktoselectPRESS,thenpressthepedal
heavilyaccordingtoyourpreference.
ClickonOKtofinishthecalibration.“ Pedalsettingcomplete”comesupforcalibratingsuccessfully.
“ Pleasesetagain”comesupforfailure,ifthishappens,pleasetrytocalibrateitagainaccordingto
theinstructionsabove.