Unpacking
1. Open the box. 2. Remove wrapping paper box on the top,
t
here is a Quick start, an after-sales
service
, an accessory kit, a power cable
and
a roll of material on the plastic box.
01
3. Take out the printer of the carton,
r
emove bubble pack outside the
p
rinter.
4. Tear o fixed tapes and front door
p
rotective bag.
5. Take power cable out and plug it
into power input.
6. Plug the other end of power cable into
socket, turn on the power switch.
To Next Page
Loading...
