快速启动指南
Creator 3 Pro / 金刚狼3 Pro
Quick Start Guide
EN/CN/DE/FR/한-A01
本手册仅适用于闪铸科技 金刚狼3 Pro 3D打印机
This guide is only applicable to FLASHFORGE Creator 3 Pro 3D printer
EN P01 / CN P09 / DE P17 / FR P25 / 한 P33
WARNING
注意事项
1. Hot! Avoid touching the heating nozzle and heating build plate in
operation.
2. Moving parts in printer may cause injury. Do not wear gloves or other
sources of entanglement in operation.
1. 高温危险！打印机喷嘴和打印平台在工作时会被加热，请避免接触!
2. 可动部件可能造成卷入挤压和切割伤害。操作机器时请不要佩戴手套或缠绕物。
To Next Page
