Flashforge Guider 3 - Equipment Operation Interface Introduction; Printing Screen Overview

5. Equipment Operation
Interface Introduction
5.1 Printing Screen
Some parameters can be adjusted during printing.
Click the [ ] icon to control the printing speed, fan and light.
After turning on the camera, users can also store photos and videos of the printing
process on the screen.
As the firmware will be upgraded from time to time, please
refer to the actual display screens. The following is only a
brief introduction of functions.
ATTENTION
15
Queue
256M 135M/8G 798M/16G
Local File USB Device
220℃
220℃
220℃
PLA
79%
Testmodel
Printing < Deteil
Remaining time 1h 18m
1185/1500
100%
70%
20m
0.05mm
Change Filament
2h 35m
PLA
0.18mm
20%
45℃
60%
15m/300g
1500
2021/11/09
45℃
45℃
Camera
Time-lapse
Pictures
Video
flashforge.jpeg
800 >
60 >
< Camera < Flashforge