FlexRadio Systems FLEX-5000 Series User Manual

O P E R A T I O N C H A P T E R 6
Power-Down Procedure
The power-down sequence is almost the reverse of the power-up procedure.
1. Stop PowerSDR by clicking on the Start/Stop button.
2. Close PowerSDR by clicking on the “X” in the upper right hand corner of the Front Console.
3. Press the FLEX-5000 blue illuminated Power switch to turn off the transceiver.
CAUTION: Make sure PowerSDR is shut-down before turning off the radio. Failing
to do so may result in instability of your computer system, leading to
a Blue Screen.
Note: The FLEX-5000C power switch will turn on both the transceiver and
the internal computer, but only turn off the transceiver. To turn off the
internal computer, click with your mouse on Start and then on Turn
Off Computer, just as you would any other Windows computer.
[The rest of this page has been left blank intentionally]
157  2003-2008 FlexRadio Systems

FlexRadio Systems FLEX-5000 Series Specifications

General

Brand	FlexRadio Systems
Model	FLEX-5000 Series
Category	Transceiver
Language	English