Flexzilla CF10050F - Page 4

4
Flexzilla Electric Operated, Oil-Free Portable Air Compressors
Dust or dust-like parculates caused by power-sanding, sawing,
grinding, drilling or any other construcon-like acvies can
contain contaminants that are harmful to breathe.
Always use your air compressor in a well-venlated and clean
area.
Never breath the air that comes directly out of the air
compressor or air hose. This air is not suitable for breathing.
Always wear approved safety equipment. When performing
dust-creang acvies, securely wear properly-t face masks or
respirators.
If your feel ill from breathing while operang your air
compressor, stop and seek medical aenon immediately.
Flying objects can cause injury to the eyes, head and other parts
of the body.
Air-powered equipment and power tools are capable of
propelling items (metal chips, fasteners and parculates) at high
speed into the air and could result in injury.
Always wear approved head and eye protecon.
Never point the air stream at any part of your body, or at
another person or animal.
When operang the air compressor, make sure all other people
and animals maintain a safe distance.
Do not move the air compressor when the air tank is under
pressure.
Never use the air hoses to pull or move the air compressor.
Keep the air compressor on a at surface.
WARNING
WARNING
RISK TO BREATHING
FLYING OBJECTS
Use cauon to minimize risk of re or explosion.
Improper care could lead to the air tank bursng or exploding.
Drain air tank daily or aer each use to prevent moisture buildup
in the air tank.
Rust can weaken the air tank and cause leaks or bursng. If rust
is detected, replace tank immediately. Do not try to repair air
tank by welding, drilling or modifying it in any other way. These
modicaons can weaken the air tank and cause a hazardous
condion.
If air tank develops a leak, replace air tank immediately. Never
repair, weld or make modicaons to air tank or its aachments.
Never make adjustments to the factory-set pressures.
Never exceed manufacturer’s maximum-allowable pressure
rang aachments.
Because of extreme heat, do not use plasc pipe or lead n
solder joints for a discharge line.
Moving parts can cause severe trauma.
Keep hands and feet away from rotang parts, e up long hair,
remove jewelry, and DO NOT wear loose clothing.
WARNING
BURSTING
RISK OF CUTTING
DANGER