NOSE VARIANTS
USER MANUAL
24
There are 2 variants of the nose. You can choose version with a VTX
mounted inside and a 19x19mm FPV camera, or a clean version with
just the FPV camera. The VTX mounts on a "shelf" and the available
space is sufficient to accommodate any VTX.
The nose is fully removable, mounted on four M3 screws. It is also
available in STEP format for easy editing. You can edit this part and
adapt it to your own more individual needs and to mount different
payload. You can also have several versions of the nose and change
them according to the needs of a particular flight.
To Next Page
