FLIR A15 User Manual

Thermographic measurement techniques18
18.2.1.1.1 Method 1: Direct method
Follow this procedure:
1. Look for possible reflection sources, considering that the incident angle = reflection an-
gle (a = b).
Figure 18.1 1 = Reflection source
2. If the reflection source is a spot source, modify the source by obstructing it using a
piece if cardboard.
Figure 18.2 1 = Reflection source
#T559770; r. AF/30726/30726; en-US
114

FLIR A15 Specifications

General

Brand	FLIR
Model	A15
Category	Thermal cameras
Language	English