The main function of the FLIR A3xx f series camera is, through adding the housing, to in-
crease the environmental specification of the standard FLIR A3xx f series camera to IP
66 without affecting any of the features available in the camera itself.
The built-in FLIR A3xx f series camera offers an affordable and accurate temperature
measurement solution for anyone who needs to solve problems that do not call for the
highest speed or reaction and who uses a PC. Due to its composite video output, it is al-
so an excellent choice for thermal image automation applications, where you can utilize
its unique properties such as looking through steam.
Key features:
• MPEG-4 streaming.
• PoE (Power over Ethernet).
• Built-in web server.
• General purpose I/O.
• 100 Mbps Ethernet (100 m cable, wireless, fiber, etc.).
• Synchronization through SNTP.
• Composite video output.
• Multi-camera utility software: FLIR IP Config and FLIR IR Monitor included.
• Open and well-described TCP/IP protocol for control and set-up.
• 16-bit 320 × 240 images @ 3 Hz, radiometric.
• Multi-camera software: FLIR Sensors Manager allows users to manage and control a
FLIR A3xx f series camera in a TCP/IP network.
Typical applications:
• Fire prevention, critical vessel monitoring, and power utility asset management.
• Volume-oriented industrial control (multi-camera installation is possible).
#T559794; r. AJ/35709/35709; en-US
6
To Next Page
Loading...
