FLIR DNR516 - Configuring General System Settings

Using the Main Menu15
5. From the Main Menu, click
and then click Storage>HDD Advance>Main
Stream. For each channel, select the hard drive group you would like to record the
main stream (high quality) video and then click Apply.
6. Click the Sub Stream tab. For each channel, select the hard drive group you would
like to record the sub stream (reduced quality) video and then click Apply.
7. Click the Picture tab. For each channel, select the hard drive group you would like to
record snap shots and then click Apply.
15.3.24 Configuring General System Settings
You can use the General menu to configure miscellaneous system settings.
#LX400023; r. 1.0/17332/17359; en-US
73