User Interface Menus
5
the material under test. See Section 15 Appendices for the Material Group
selection tables that help you select the correct group number.
Figure 5.17 Selecting a Material Group for pin-based moisture measurements
• Pin mode: Select this mode when using an external pin probe. See Sec-
tion 7.6 External Pin Probe Measurements for more information.
Figure 5.18 Selecting pin-based measurement mode
• Pinless mode: Select this mode when using the pinless sensor (rear of
MR277). See Section 7.5 Pinless Moisture Measurements for more
information.
Figure 5.19 Selecting the pinless measurement mode
#NAS100005; r. AG/62027/62027; en-US
15
To Next Page
Loading...
