OPTIONAL LED FLOODLIGHT
An optional LED lighting package is available for the lift. The lighting package is mounted on the wireless receiver post and
plugs into the receiver. The wireless remote receiver plugs into the “Radio Remote” socket on the lift’s Advance Control
System. Installation instructions are included in the light kits. The 120 LED floodlight is about equivalent to a 75 watt
incondesent. There are two bulbs per kit.
Exterior Lighting
Lift Light Kit
Wireless remote is
an optional feature. The
wireless remote control will
operate both the lift and the
lighting system.
Sold separately.
Loose fasteners can cause instability in the lift frame
resulting in premature wear to the lift structure and
create a structurally unsafe boat lift. Damage due to
loose fasteners or improper assembly and/or
maintenance will void warranty .
Do not use a boat lift with cables that show any
abnormalities. If a cable breaks under pressure, the boat
will drop suddenly causing potential damage to the boat,
the boat lift, and can cause serious injury or death.
WARNING
INSPECTIONS & MAINTENANCE
• Check all structural fasteners annually to ensure that
they are tight.
• Inspect all cables at least annually. Any frayed,
deteriorating or visibly stressed cables must be
replaced before the lift is used.
• Check all seven pulleys (sheaves) annually to make sure
they are turning free and true. Ensure that the cables are
running properly in the grooves or channels of the pulleys.
Check the bushings for any signs of wear. If there is too
much vertical play at the top and bottom of a pulley on its
Fig. 63 Pulley with too
much side-to-side play
(not vertically aligned)
Fig. 62
Pulley with proper vertical
orientation on its axis
WARNING
axis, (more than an 1/8”), replace the bushing, and if
necessary, the sheave itself. See Figs. 62 & 63.
• Visually inspect lift frame annually for cracks or damage.
Replace any cracked or damaged parts before using lift.
• If the lift receives wind damage or is moved or blown over by
the wind, a full inspection (preferably by a trained FLOE
dealer or other knowledgeable professional) must be
completed before the lift is used.
• Grease lift as outlined in this manual. See Fig. 65 on the
following two pages.
24
To Next Page
Loading...
