OPERATION /
CALIBRATION
ASSEMBLY /
INSTALLATION
SAFETY /
SPECIFICATIONS
GETTING STARTED
10
PARTS & SERVICE
For warranty consideration, parts, or other service information, please
contact your local distributor. If you need further assistance, contact
the GPI Product Support Department in Wichita, Kansas, during
normal business hours.
A toll free number is provided for your convenience.
1-888-996-3837
To obtain prompt, efficient service, always be prepared with the following
information:
• The model number of your meter.
• The serial number or manufacturing date code of your meter.
• Part descriptions and numbers.
For warranty work, always be prepared with your original sales slip or other
evidence of purchase date.
PARTS / ACCESSORIES LIST FOR TM SERIES METERS
Part Number
Description
116000-1 Calibration container, Large (5 gallon)
901002-52 Seal
113435-10 Conditioned Signal Module (GEN 2)
125060-10 Pulse Access/External Power/Scaled Module (GEN 2)
125100-10 4-20mA Module
IMPORTANT: Please contact GPI before returning any parts. It may be
possible to diagnose the trouble and identify needed parts in a telephone
call.
This product is in compliance with the RoHS
Directive of the European Parliament and of the
Council on the Restriction of the Use of Certain
Hazardous Substances in Electrical and Electronic
Equipment.
Environmental Rating: IP65
MAINTENANCE /
REPAIR
Do not return this product without prior approval from the GPI Product
Support Department. Due to strict government regulations, GPI cannot
accept parts unless they have been drained and cleaned.
WEEE DIRECTIVE ROHS COMPLIANT (2011/65/EU)
To Next Page
Loading...
Need help?
General
