To Next Page

To Previous Page

SAFETY /

SPECIFICATIONS

ASSEMBLY /

INSTALLATION

OPERATION /

CALIBRATION

MAINTENANCE /

REPAIR

GETTING STARTED

BEFORE YOU BEGIN

Usage Requirements

• Use TM Series meters with water and other chemicals compatible

with wetted components.

• DO NOT use to meter fuel or incompatible chemicals.

• TM Series meters are very sensitive to electric noise if operated

within 1 to 2 inches of some electric motors or other sources of

electronic noise.

• This meter is not legal for trade applications.

UNPACKING/INSPECTION

Inspect

• After unpacking the unit, inspect carefully for any damage that may

have occurred during transit. Check for loose, missing or damaged

parts. Shipping damage claims must be led with carrier.

• See General Safety Instructions, and all Cautions, Warnings, and

Dangers as shown.

tools.eps

box.eps

magnify_2.eps

warning symbol.eps

measure.eps

plug.eps

oil.eps

megaphone.eps

biohaz.eps

Battery_Caution1.eps

Caution.eps

Crush_Caution1.eps

Electrical_Caution.eps

Face_protection.eps

Fall_Hazard.eps

Fall_protection.eps

GearHand_Hazard.eps

Head_protection.eps

Heavy_Hazard.eps

Hot_surface.eps

Recycle.eps

Resp_protection1.eps

Resp_protection2.eps

Temp_Caution1.eps

body_protection.eps

chemical_Caution.eps

ear_protection1.eps

explosive_caution.eps

eye_protection1.eps

foot_protection.eps

hand_protection.eps