4
BEFORE YOU BEGIN
Usage Requirements
• This 4-20mA module is not FM Approved. Therefore, use of this module
with an approved metering system voids FM Approval.
• This 4-20mA module requires an input power of 8-32 volts DC (24 VDC
is recommended).
• This 4-20mA module is designed for use with most* FLOMEC meters that
are equipped with the Q9 display option. The 4-20mA module can be field
calibrated through the configuration menu options on the Q9 display.
*FLOMEC QSE meters have their own 4-20mA module.
UNPACKING/INSPECTION
Inspect
• After unpacking the unit, inspect carefully for any damage that may have
occurred during transit. Check for loose, missing or damaged parts.
Shipping damage claims must be filed with carrier.
• See General Safety Instructions, and all Cautions, Warnings, and Dangers
as shown.
To Next Page
Loading...
Need help?
General
