IPS Detect
Page 20 of 35
OIM_FLS_IPS Detect_EN_14
Subject to technical changes! FLOWSERVE
6 Trouble-shooting
Failure during operation and/or measurement modes are displayed as follows:
-
Green, ye
electronic failure / sensor failure
The user needs to check that the power supply has been adequately connected before the
system was started.
Error Resolution Personnel
LED display no system
check
[running light
LED]
- Power supply [Vcc>=11V]
- Check the polarity of the cable
Operator
No LED display - Check the polarity of the cable
No software
Operator
Service
...
To Next Page
Loading...
