Flowserve Limitorque MX - Set Up Enhanced ESD and PST

Limitorque MX Electronic Actuator FCD LMENIM2350-02 A4 – 05/16
28
FLOWSERVE PROPRIETARY INFORMATION
Use or disclosure of this information is subject to the restrictions on the title page of this document
9.4.5 Set Up Enhanced ESD and PST
NOTE: Enhanced ESD and PST is a factory-enabled option that should be purchased with the actuator. It may be added
to in-service actuators but service and acquisition fees will be applied.
NOTE: For other configuration options, refer to the Instruction, Operation and Maintenance [IOM] manual for
Limitorque MX Electronic Actuator, LMENIM2306.
Figure 9.3 - Enhanced SIF & PST Configuration Dialog