Flowserve.com 3 PUIOM000650-00-UIM (EN/HL) August 2022
SEM-100 and SEM-100FT User Instructions
1. Introduction and safety
1.1 General
These instructions must always be kept close to the
product’s operating location or directly with the product.
Flowserve products are designed, developed and manufactured with
state-of-the-art technologies in modern facilities. The unit is produced
with great care and commitment to continuous quality control, utilizing
sophisticated quality techniques and safety requirements.
Flowserve is committed to continuous quality improvement and
being at service for any further information about the product in its
installation and operation or about its support products, repair and
diagnostic services.
These instructions are intended to facilitate familiarization with the
product and its permitted use. Operating the product in compliance
with these instructions is important to help ensure reliability in service
and avoid risks. The instructions may not take into account local
regulations; ensure such regulations are observed by all, including
those installing the product. Always coordinate repair activity with
operations personnel, and follow all plant safety requirements and
applicable safety and health laws and regulations.
These instructions must be read prior to installing, operating, using
and maintaining the equipment in any region worldwide. The equipment
must not be put into service until all the conditions relating to safety
noted in the instructions have been met.
To Next Page
Loading...
