Flowserve SEM-100 - Duty Conditions; Safety

Flowserve.com 5 PUIOM000650-00-UIM (EN/HL) August 2022
SEM-100 and SEM-100FT User Instructions
1.4 Duty conditions
This product has been selected to meet the specications of your purchase
order. The acknowledgement of these conditions has been sent separately
to the Purchaser. A copy should be kept with these instructions.
The product must not be operated beyond the parameters specied for
the application. If there is any doubt as to the suitability of the product for the
application intended, contact Flowserve for advice, quoting the serial number.
1.5 Safety
1.5.1 Summary of safety markings: These User Instructions contain
specic safety markings where non-observance of an instruction would
cause hazards. The specic safety markings are:
This symbol indicates safety instructions where non-compliance would
affect personal safety and could result in loss of life.
1.5.2 Personnel qualification and training: All personnel involved in
the operation, installation, inspection and maintenance of the unit must be
qualied to carry out the work involved. If the personnel in question do not
already possess the necessary knowledge and skill, appropriate training and
instruction must be provided. If required, the operator may commission the
manufacturer/supplier to provide applicable training.
Always coordinate repair activity with operations and health and safety
personnel, and follow all plant safety requirements and applicable safety and
health laws and regulations.
PUMP IS NOT TO BE USED IN POTENTIALLY EXPLOSIVE ATMOSPHERES.