Flowserve.com 6 PUIOM000650-00-UIM (EN/HL) August 2022
SEM-100 and SEM-100FT User Instructions
2. Transport and storage
2.1 Consignment receipt and unpacking
Immediately after receipt of the equipment, it must be veried for contents
and inspected for damages in transportation. Any shortage and/or damage
must be reported immediately to distributor/Flowserve Scienco and must
be received within 10 days of receipt of the equipment. Later claims cannot
be accepted.
Check any boxes or wrappings for any accessories or spare parts that
may be packed separately with the equipment.
Each product has a unique serial number. Check that this number corresponds
with that advised, and always quote this number in correspondence as well as
when ordering spare parts or further accessories.
2.2 Storage
Normal packaging is designed to protect the pump and parts during
shipment and storing.
2.3 Recycling at end of product life
At the end of the service life of the product, the relevant materials and parts
should be recycled or disposed of using an environmentally acceptable
method and in accordance with local regulations.
Make sure that hazardous substances are disposed of safely
and that the correct personal protective equipment is used. The
safety specications must be in accordance with the current local
regulations at all times.
To Next Page
Loading...
