flsun C-PLUS - g28-all axis go home; m114-check the current coordinates of the nozzle

-
13
-
(1) g28----all axis go home
In the repetier letters are case-insensitive,G28 also can be used.but in simplify3D,only can use
capital letters .The other command is the same
Send g28,in delta 3D printer all axis rise and hit limit switch ,G28 is same to this icon
(2) m114----check the current coordinates of the nozzle
input m114 and send ,can see the current coordinates of the nozzle in information bar.