Fluidwell E018 Tutorial

16 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

FW_E110_AutoUnitConv_002_EN Page 1

E-SERIES

Flow rate indicator / Totalizer

E110-SERIES TUTORIAL

AUTOMATIC UNIT CONVERSION

NOTICE

This E110-series tutorial is meant as a step-by-step guidance on how to use and

set the automatic unit conversion. This tutorial is an addendum to the installation

manual that came with the E-series.

This E110-series tutorial assumes that the E-series is in a safe area.

E-series - Explosion proof indicators for hazardous areas.

More info: www.fluidwell.com/eseries

Table of Contents

Other manuals for Fluidwell E018

Operation Manual64 pages

Questions and Answers:

J
Jason PrinceAug 17, 2025
Why is my Fluidwell E018 flowmeter generating too many pulses?
- E
  Erin JohnsonAug 17, 2025
  If your Fluidwell Measuring Instruments flowmeter generates too many pulses, check the settings for Total and Flowrate and the type of signal selected versus the actual signal generated. Also, verify the sensitivity of the coil input. Ensure proper grounding by reconnecting ground cables and avoiding ground loops, connecting the screen to the ground input terminal of the flowmeter input. Use screened wire for flowmeter signals.
J
Jennifer BallAug 20, 2025
What to do if the analog output of Fluidwell E018 Measuring Instruments does not function properly?
- W
  William CohenAug 20, 2025
  If the analog output of your Fluidwell Measuring Instruments does not function properly, check the function mode and the settings for minimum and maximum flowrate. Also, verify the tuning of the minimum and maximum output current. Finally, confirm the connection of the external power supply.
J
Jeremy MarshallAug 22, 2025
How to troubleshoot a Fluidwell Measuring Instruments flowmeter that does not generate pulses?
- W
  William FoxAug 22, 2025
  If your Fluidwell Measuring Instruments flowmeter does not generate pulses, check the signal selection in the SETUP menu. Verify the pulse amplitude and inspect the flowmeter, wiring, and connection of terminal connectors. Also, check the power supply of the flowmeter.

Fluidwell E018 Specifications

General

Brand	Fluidwell
Model	E018
Category	Measuring Instruments
Language	English

Related product manuals

Preview: Fluidwell E119-P

Fluidwell E119-P

Fluidwell E Series

Preview: Fluidwell F115-P

Fluidwell F115-P

Fluidwell F110-P

Preview: Fluidwell F012-P

Fluidwell F012-P