1
Introduction
XW Warning
To prevent electric shock or personal injury, do not perform the calibration verification tests or
calibration procedures described in this manual unless you are qualified to do so. The
information provided in this document is for the use of qualified personnel only.
This Calibration Information provides the information necessary to adjust and verify the performance of the
Fluke Models 110, 113, 114, 115, 115C, 116, 116C, 117, and 117C True RMS Multimeter (the Meter or
Product). When specific models are noted in this manual, the “C” version is also included. For example, when
the listed model is 115, the instructions are applicable to the 115C as well.
For complete operating instructions, refer to the 110/113/114/115/117 Users Manual or 116 Users Manual at
www.fluke.com
.
How to Contact Fluke
To contact Fluke, call one of the following telephone numbers:
• Technical Support USA: 1-800-44-FLUKE (1-800-443-5853)
• Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853)
• Canada: 1-800-36-FLUKE (1-800-363-5853)
• Europe: +31 402-675-200
• Japan: +81-3-6714-3114
• Singapore: +65-6799-5588
• China: +85-400-921-0835
• Brazil: +55-11-3530-8901
• Anywhere in the world: +1-425-446-5500
Or, visit Fluke's website at www.fluke.com
.
To register your product, visit http://register.fluke.com
.
To view, print, or download the latest manual supplement, visit http://us.fluke.com/usen/support/manuals
.
Safety Information
General Safety Information is in the printed Safety Information document that ships with the Product and at
www.fluke.com. More specific safety information is listed where applicable.
Specifications
For complete Specifications, refer to the 110/113/114/115/117 Users Manual or 116 Users Manual at
www.fluke.com
.
To Next Page
Loading...
