Fluke 12E - General Specifications

Multimeter
General Specifications
11
General Specifications
Maximum Voltage between any Terminal
and Earth Ground:
1000V

Fuse Protection for mA
μ
A inputs: 500 mA, 1000 V FAST, Min. Interrupt Ratin
g
20,000 A

Fuse Protection for A input: 10 A, 1000 V FAST, Min. Interrupt Ratin
g
20,000 A
Display: Di
g
ital: 4000 count updates 3/sec
Temperature: Operatin
g
: 0 °C to 40 °C, Stora
g
e: -30 °C to 60 °C indefinitel
y
(to -40 °C for 100 hours)
Operating Altitude: 0 to 2000 meters
Temperature Coefficient: 0.1 X (specified accuracy)/ °C (<18 °C or >28 °C)
Electroma
g
netic Compatibilit
y
: Complies with FCC Part 15, Class B, IEC 61326, 3 V/m, performance criterion B
Rated Transient Overvoltage: 4 kV (1.2 x 50 μs) Peak for measu
r
ement Cate
g
ories I, II, and III.
Relative Humidity: Noncondensing < 10 °C
90% from 10 °C to 30 °C; 75% from 30 °C to 40 °C
Relative Humidity, 40 MΩ Range: 80% from 10 °C to 30 °C; 70% from 30 °C to 40 °C
Battery Type: 2 X AA, NEDA 15A, IEC LR6
Battery Life: Alkaline: 500 Hours
Size (H x W x L): 180 mm x 89 mm x 51.5 mm (with holster)
Weight: 425 grams
Certifications: CMC, 
Safety Compliance: IEC 61010-1, 2000 CAT I 1000 V, CAT II 600 V, and CAT III 300 V overvoltage standards
Overvoltage installation categories per IEC 61010-1, 2000: The Meter is designed to protect against transients in these catagories:
CAT I
CAT II
CAT III
From high-voltage low-energy sources, e.g., electronic circuits or a copy machine.
From equipment supplied from the fixed installation, e.g., TVs, PCs, portable tools and household appliances.
From equipment in fixed equipment installations, e.g., installation panels, feeders and short branch circuits, and lighting
systems in large buildings.