Fluke 12E - Introduction; Safety Information; Safe Working Practices

1
12E
Multimeter
Introduction
Warning
To avoid electric shock or personal injury,
read "Safety Information” and “Warning and
Precautions” before using the Meter.
The Fluke 12E Multimeter (hereafter referred to as “the
Meter”) is a 4,000 count instrument.
The Meter is battery powered with a digital display.
Safety Information
The Meter complies with IEC 1010-1 CAT I 1000 V, CAT
II 600 V, and CAT III 300 V overvoltage standards. See
Specifications.
Use the Meter only as specified in this manual, otherwise
the protection provided by the Meter may be impaired.
In this manual, a Warning identifies conditions and
actions that pose hazards to the user.
A Caution identifies conditions and actions that may
damage the Meter or the equipment under test.
International symbols used on the Meter and in this
manual are explained in Table 1.
Safe Working Practices
Review the safety information and comply with the safe
working practices on pages 2 and 3.