EasyManua.ls Logo

Fluke 150X Series - Contact Fluke; General Specifications; Basic Maintenance; Product Cleaning

Fluke 150X Series
33 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Insulation Testers
Contact Fluke
3
Table 1. S ymbols
Contact Fluke
Fluke Corporation operates worldwide. For local contact information, go to our website:
www.fluke.com
To register your product, view, print, or download the latest manual or manual supplement, go
to our website www.fluke.com
.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
+1-425-446-5500
fluke-info@fluke.com
General Specifications
For specifications, see the Product user manual located at www.fluke.com
Basic Maintenance
This basic maintenance section contains tests and procedures that require no equipment
other than the Tester and some items such as fuses and batteries. Also, internal access is
limited to the battery and fuse compartment.
Clean the Product
To clean the Product, wipe it with a damp cloth and mild detergent. Do not use abrasives or
solvents. Dirt or moisture on the terminals can affect readings.
B AC (Alternating Current) J Earth Ground
F DC (Direct Current) I Fuse
X WARNING: risk of electric shock. T Double Insulated
M
Battery (Low battery when shown
on display.)
W Important information; see manual
6 WARNING. Do not apply greater than 660 Volts.

Related product manuals