1621
Users Manual
2
Safety Regulations
This measuring device is only to be installed and operated by qualified
personnel in compliance with the safety precautions and regulations that
follow. Additionally, the use of this equipment requires compliance with all
legal and safety regulations pertaining to each specific application. Similar
regulations apply to the use of accessories.
Qualified personnel are persons familiar with the setup, installation, starting,
and operation of the device, and are formally qualified to perform such
activities.
In this manual, a WWarning identifies hazardous conditions and actions that
could cause bodily harm or death. A WCaution identifies conditions and
actions that could damage to the Tester, the equipment under test, cause
permanent loss of data, or impair Tester performance. Disregarding warning
and caution notices can lead to serious physical injury and material damage.
XW Warning
To avoid electrical shock or damage to the Tester:
• If the Tester is used in a manner not specified in this
manual, the protection provided by the Tester may be
impaired.
• Operating electrical devices implies that parts of the
device carry dangerous voltages.
• Assume that safe operation of the Tester is not
possible if the device shows visible damage.
• Assume that safe operation of the Tester is not
possible if the device has been exposed to unfavorable
conditions (for example, storage beyond the
permissible climatic limits without adaption to the
ambient climate and dewing).
• Assume that safe operation of the Tester is not
possible if the device has been exposed to major strain
during transport (for example, dropped from some
height without visible external damage).
• Do not connect Tester to hazardous voltage.
To Next Page
Loading...
Need help?
General
