Fluke 1621 - Specifications

Earth Ground Tester
Specifications
15
Specifications
Note
Fluke reserves the right to modify specifications without notice for the
purpose of product improvement.
Measuring functions: 3-pole earth ground resistance,
2 pole AC resistance of a conductor
Interference voltage
Intrinsic error: Refers to the reference temperature range and is
guaranteed for 1 year
Measuring rate: 2 measurements / second
Battery condition: LO-BAT is displayed if voltage drops below 6.5 V
Voltages:
Between jacks H/C2
and E/C1:
250 Veff maximum (effective voltage)
Between jacks S/P2
and E/C1:
250 Veff maximum
Climatic class: VDE/VDI 3540 RZ (conforming to KWG as per
DIN 40040, 4/87)
Temperature ranges:
Working: -10 °C to +50 °C (+14 °F to +122 °F)
Operating: 0 °C to +35 °C (+32 °F to +95 °F)
Storage: -20 °C to +60 °C (+68 °F to +140 °F)
Reference: +23 °C ± 2 °C (+73 °F ± 4 °F)
Note
The chart of four temperature ranges for the Tester exists to satisfy
European Standards requirements; the instrument can be used over
the full working temperature range by using the temperature
coefficient to calculate accuracy at the ambient temperature of use.