Fluke 1621 - Symbols

Earth Ground Tester
Symbols
3
• Do not open the battery compartment when leads are
connected.
• While a measurement is in progress, do not touch the
earth electrode, auxiliary electrode or probe.
Symbols
The following symbols are found on the Tester or in this manual.
X
Hazardous voltage. Voltage >30 V dc or ac peak might
be present.
W
Risk of danger. Important information. See Users
Manual.
T Double insulation
Battery
P Conforms to relevant European Union directives
~
Do not dispose of this product as unsorted municipal
waste. Contact Fluke or a qualified recycler for disposal.
CAT II
The enclosure is designed for 600V CATII pollution
degree 2 to cover unintended connection to hazardous
fault voltages at the earthing system.
CAT II equipment is designed to protect against
transients from energy-consuming equipment supplied
from the fixed installation, such as TVs, PCs, portable
tools, and other household appliances.